Traxxas TRX-4 Aluminum Front Bumper with LEDs and D-Rings by JAZRIDER JR-TRX443  [JR-TRX443]

Aluminum front bumper for scale crawlers

This is an RC-scale front bumper designed for Traxxas TRX-4 and Axial SCX10 II chassis, built from aluminum and fitted with integrated LED lights and recovery D-Rings. The unit serves as a functional chassis accessory to protect the front end during scale trail use and to provide mounting points for lighting and recovery gear.

Compatibility is limited to the listed platforms: Traxxas TRX-4 and Axial SCX10 II. The bumper uses the vehicle's front mounting points and replaces or augments the stock front bumper; check your chassis mounting pattern before installation. No additional tools or parts are assumed beyond common hobby tools for light-duty bracket work.

Installation notes: remove the stock bumper and align this bumper to the existing mount holes on the chassis, use supplied or equivalent hardware to secure it, and route LED wiring to a suitable power source on your model such as a switched lighting circuit or low-voltage accessory output on your ESC or separate battery pack. For setup, verify LED polarity and secure wiring away from moving suspension or steering components. Use the D-Rings as scale recovery points only and avoid applying full-size vehicle recovery loads.

Tuning role: this bumper adds frontal protection and a solid mounting base for lights and scale hardware, affecting approach angles and front-end weight distribution slightly; consider minor suspension or shock preload adjustments if the added mass noticeably changes ride height or handling in precise crawl setups.

Choose this aluminum front bumper when you want a durable scale accessory that combines protection, lighting, and recovery points for TRX-4 and SCX10 II based rigs, keeping installation and tuning straightforward for trail and crawling use.