TRAXXAS TRX4 Trail Crawler Spring Steel Turnbuckles by GPM TRX4162ST  [TRX4162ST]

Adjustable spring steel tie rods for TRX4

These turnbuckles are a direct aftermarket tie rod set designed for scale TRAXXAS TRX4 Trail Crawler use, supplied as a 7pcs set to replace or upgrade the stock linkages. Constructed from spring steel, the parts resist bending and hold adjustment when the suspension cycles under load during crawling and trail driving.

The primary function is to allow precise wheel-track tuning by changing each tie rod length. Each link can be shortened by 1.2mm or lengthened by up to 3mm relative to the original length, providing a controlled range for toe, tracking, and stance adjustments. They are intended to work with the original ball ends from the vehicle.

Installation is standard for threaded turnbuckles: remove the stock tie rods, fit the ball ends, and thread the turnbuckle to the required length while checking wheel alignment on a flat surface. After setting, verify thread engagement and lock any adjustment with the original ball-end retention method used on the chassis.

Use these turnbuckles when you need durable, tunable tie rods for wheel-track and toe adjustments on TRX4-based trail crawlers, keeping original ball ends for reliable fitment.