TRAXXAS UNLIMITED DESERT RACER Front Sway Bar & Arm 12pcs by GPM SUDR312FS  [SUDR312FS]

Front sway bar upgrade

This 12pcs front sway bar kit is an RC-scale upgrade intended for the TRAXXAS UNLIMITED DESERT RACER chassis, combining stainless steel and aluminum components to change roll response and tie-rod geometry at the front axle. The set replaces the stock front sway bar and arms with a thicker stainless steel bar and aluminum sway bar arms that provide two tie-rod mounting positions for setup flexibility.

Installation requires removing the stock front sway bar components, fitting the stainless steel sway bar into the stock mounts, and using the included 3.5mm reamer to enlarge factory holes if needed. Fasteners are supplied to secure the arms and linkages, and the tie rods are attached at the chosen holes to alter the bar arm angle and effective roll stiffness.

Technically this kit is intended to affect handling by offering a stiffer bar section (listed as increased thickness) and adjustable leverage through dual arm positions, useful when tuning for different track surfaces or suspension setups.

Use the dual mounting holes on the arms to tune roll resistance and tie-rod angle; keep the included reamer on hand during fitment to ensure correct hole clearance and secure assembly.