TRAXXAS Unlimited Desert Racer Stainless Steel Front+Rear Sway Bars 3pc set by GPM SUDR311FR  [SUDR311FR]

Stainless steel sway bars for SUDR312FS/FRS

This is an RC-scale sway bar upgrade set designed for the TRAXXAS Unlimited Desert Racer platform, supplied as an aftermarket part by GPM. The kit focuses on front and rear anti-roll control using thicker stainless steel rods to change roll characteristics without altering other suspension components.

Key hardware details from the original item description: the sway bars are made from stainless steel and the diameter has been increased from approximately 2mm to 3.4mm to raise torsional stiffness, and the package includes the tools needed to adjust fitment during installation. The set is provided as 2 pcs sway bar elements plus 1 pcs reamer for hole enlargement.

Installation note: use the supplied reamer to carefully enlarge the locating holes on the chassis or suspension mounts as required for a smooth fit. Work incrementally and check alignment of the sway bar ends and mounting points before final tightening to avoid binding.

Tuning role: thicker stainless steel sway bars reduce chassis roll and shift balance between understeer and oversteer depending on which axis is stiffened. Treat these bars as a tuning lever—swap front or rear stiffness selectively to dial handling rather than relying solely on springs or shock settings.

Compatibility note: this item is used for SUDR312FS & SUDR312FRS only, confirm chassis code before purchase.