TRAXXAS Xo-1 Aluminium Front Arm Bulk by GPM XO008  [XO008]

Aluminium front arm bulk for XO-1

This is an aluminium front arm bulk intended for Traxxas XO-1 scale RC use, supplied as 1 pcs. The component replaces the front arm bulk on the XO-1 chassis and is offered as an aftermarket aluminium replacement part by GPM XO008.

Fitment is specific to the XO-1 designation stated in the product name; verify that your chassis uses the same front bulk layout before ordering. This listing does not include additional hardware or accessories unless specified by your supplier.

Installation notes: remove the original front arm bulk following your vehicle’s disassembly sequence, transfer any existing bearings or retainers that are reused, align the replacement part to the steering assembly, and secure with the original fasteners to the manufacturer’s torque guidelines. After installation, check steering range and suspension travel and correct toe or camber if needed.

Tuning role: as an aluminium front arm bulk, the part affects front-end stiffness and steering feedback. Swapping to a denser material can reduce flex under load and provide a more linear steering response, which is useful when adjusting front suspension settings for on-road or speed-oriented setups. Expect changes in feel rather than wholesale performance gains.