TY1 HS3911 5-Pin Balance Charging Adaptor for 4S 14.8V LiPo  [HS3911]

Balance charging adaptor for 4S LiPo

This adaptor is an RC-scale balance lead adapter intended to link a 4S 14.8V LiPo pack's balance port to a charger balance socket using a 5-pin interface. Its role is to provide a straightforward connection for balance charging and cell voltage monitoring when using bench chargers or multi-chemistry chargers that accept separate balance leads.

Installation is simple: with the charger powered off, plug the adaptor into the battery's balance lead, then connect the balance plug to the charger. Verify that the charger is set to LiPo and 4S before applying charge current. This adaptor does not replace main charge leads or protective circuitry, it only routes the balance taps for monitoring and balancing during charge cycles.

In tuning and maintenance workflows the adaptor is useful for quickly checking individual cell voltages and for routine balance charging during battery care. Always inspect leads and connectors for damage before use and follow your charger's safety instructions.