Group of molded composite eccentric bushings for aluminum rear hub providers #353355 and #353365. The eccentric bushings are employed for back suspension geometry adjustment. Exchanging the bushings allows 9 different geometry settings. Each bushing is marked for effortless identification.
The set of bushings includes the following: 0 = no offset; opening in center of bushing 1 = hole offset 1mm from center 1.1 = hole offset 1mm straight and 1mm horizontal from center 2 = 2° outboard toe-in bushing essential: always utilize the same bushing on remaining and rear aluminum back hub if you employ an eccentric gap bushing (1, 1.1 and 2), left side must certanly be other toward right part.
