XRAY T3'12 Front Shock Tower 3.0MM Graphite by Arrowmax AM-T3-303086  [AM-T3-303086]

Front 3.0MM Shock Tower for T3'12

This is an RC-scale front shock tower designed for the T3'12 chassis, produced under Arrowmax part AM-T3-303086. Machined from 3.0MM graphite plate, the tower locates the front shocks and provides fixed mounting points used when adjusting shock angle, preload location, and roll-center geometry during setup.

Installation is straightforward for existing T3'12 front end layouts: remove the original tower, align this unit to the stock mounting holes, and reuse the chassis hardware and screws supplied with your kit. No special tools beyond common hex drivers are required, and the part is intended to work with standard shock assemblies and linkages found on the specified chassis.

In tuning terms, this tower serves as a stable reference for front suspension geometry; moving shock mounting positions or switching tower thickness alters leverage and response, so changes should be tested incrementally on track to evaluate effects on balance and handling.