XRAY X4F'25 Main Chassis Graphite 2.25 by Factory Pro O-XCP021  [FP-O-XCP021]

Price:
USD$45.90
Brand:
Factory Pro
Model:
FP-O-XCP021
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Main chassis for XRAY X4F'25

This Factory Pro replacement main chassis is specified for XRAY X4F'25 kits and carries the original Factory Pro part code O-XCP021. The plate is produced in graphite and marked as 2.25, fitting the X4F'25 geometry without altering the kit's intended mounting points.

Use this chassis when replacing a damaged original plate or when reverting to stock geometry during setup changes. It serves as the structural foundation for suspension pick-ups, gearbox location, and servo/ESC placement, so inspect mounting faces and fastener holes for correct alignment before final assembly.

Installation notes: transfer the kit's existing screws and hardware where applicable, verify drivetrain and gearbox mesh after refitting, and confirm that servo and ESC clearances match the original layout. Small alignment differences are addressed by using the kit's original shims and spacers rather than modifying the plate.

Specifications

  • Item: Main chassis
  • Material: Graphite
  • Model Number: O-XCP021
  • Compatibility: Xray X4F'25

This chassis is a direct replacement option for X4F'25 kits that requires no special adapters; use existing kit hardware and follow the kit torque and assembly sequence for reliable results.

Is this chassis compatible with X4F'25 kits?

Yes, the part is specified for X4F'25 and matches the kit's mounting pattern and geometry.

Does it include mounting hardware?

No mounting hardware is listed with the part, so reuse the kit screws and spacers or order the required fasteners separately.

Will switching to this plate affect tuning?

The plate maintains original geometry; any tuning changes should come from suspension, shock, or weight distribution adjustments rather than the chassis itself.

Any special care for graphite components?

Clean with a soft brush and isopropyl alcohol for adhesive residue, avoid overtightening screws to prevent cracking, and inspect for stress marks after hard impacts.

Do I need to modify the gearbox or motor mounts?

No modifications are expected; the chassis is intended to accept the stock gearbox and motor mounting positions used by X4F'25 kits.

How should I verify fitment after installation?

Check drivetrain mesh and free rotation, confirm suspension travel without binding, and verify that servo and ESC align with the intended mounting clearances.

Copyright © 2008-2026 rcjaz.com All rights reserved