YOKOHAMA VANQUISH H10 OPTIC 7075-T6 Alloy High-clearance Upper & Lower Link Bar set by GPM H101449  [H101449]

High-clearance link bar set

This 1/10-scale accessory is an upper and lower link bar set produced by GPM for the VANQUISH H10 OPTIC crawler platform, intended exclusively for radio-controlled models. The set replaces factory part number IRC00307 and uses CNC-machined 7075-T6 aluminum to hold suspension geometry while increasing ground clearance to reduce hang-ups on rocks and steep terrain.

The lower links use a high-clearance geometry with a center point of 138mm and a thickness of 6.5mm, while upper link dimensions differ front to rear: front upper link center point 139mm with 4.0mm thickness and rear upper link center point 129mm with 5.0mm thickness. These measurements maintain the intended suspension geometry for improved crawling consistency.

Parts are pre-assembled in the package, and GPM recommends using medium-strength screw glue on metal-to-metal fasteners to prevent gradual loosening under repeated crawling loads. Installers should verify link alignment and clearance at full suspension droop before final torqueing.

For builders focused on obstacle clearance and consistent suspension geometry on the VANQUISH H10 OPTIC platform, this 7075-T6 aluminum link set provides a direct replacement that retains design geometry while raising clearance points for technical crawling.