Yokomo YOKB2-413 - Front Steering Hub Carrier for B-Max 2  [YOKB2-413]

Front steering hub carrier

The Yokomo YOKB2-413 front steering hub carrier is an RC-scale replacement part designed specifically for the B-Max 2 chassis. It serves as the mounting point for the front knuckle and links the steering linkage to the wheel assembly, playing a direct role in steering geometry and on-track handling.

Compatibility is limited to the B-Max 2 platform as stated in the product name; do not assume fitment to other Yokomo or third-party chassis without verification. This hub carrier is intended as a direct replacement to restore or alter front steering behavior during setup work.

Installation is straightforward for users familiar with 1/10 scale touring car maintenance: remove the front wheel and steering knuckle assembly, swap the hub carrier while noting bearing positions and spacer placement, then reassemble with correct preload and steering linkage alignment. Use the same hardware you removed and check for full range of motion and any binding before track testing.

In tuning terms the hub carrier affects scrub radius, steering response, and roll center relations when combined with other front-end parts. When adjusting handling, consider this part as one element among wheel offset, suspension setup, and steering link geometry rather than a standalone fix.