Yokomo B8-202SS Steering Bell Crank set for BD8 2018, aluminum bell crank with press-fitted bearings  [B8-202SS]

Yokomo B8-202SS Steering Bell Crank set for BD8 2018
Price:
USD$22.00
Brand:
Yokomo
Model:
B8-202SS
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Steering bell crank for BD8 2018

This aluminum steering bell crank is an RC-scale replacement part designed for the BD8 2018 platform. The unit uses press-fitted bearings intended to reduce steering play and maintain consistent link movement during runs.

Fitment focuses on compatibility with BD8 2018 series chassis and the specified MRTC-BD818 / MRTC-BD818A variants. Installation requires aligning the bell crank with the steering link geometry and confirming smooth rotation of the pressed bearings before final assembly.

Tuning role: this part provides a firm steering pivot point that helps preserve linkage geometry under steering loads, supporting consistent toe and turn-in behaviour when making incremental setup changes.

Specifications

  • Item Steering bell crank set for BD8 2018
  • Material Aluminum
  • Model Number B8-202SS
  • Compatibility BD8 2018, MRTC-BD818, MRTC-BD818A

Use this bell crank when replacing worn plastic pivots or when a firmer aluminum pivot is required for consistent steering response on on-road tracks.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is this bell crank compatible with BD8 2018 only?

It is specified for BD8 2018 and lists compatibility with MRTC-BD818 and MRTC-BD818A chassis.

Do the press-fitted bearings need lubrication before installation?

Light lubrication is acceptable to ensure smooth rotation, but avoid excess that could attract dirt; verify smooth bearing spin after press-fit.

Will switching to aluminum affect steering feel?

Aluminum pivots typically reduce flex compared with plastic, which can yield a firmer and more consistent steering response under load.

Any special checks after installing the bell crank?

Confirm the bearings rotate freely, steering geometry remains unchanged, and there is no binding throughout the steering throw.

Copyright © 2008-2026 rcjaz.com All rights reserved