Yokomo B9-32LA19A Lower Bulkhead (A) for BD9, front left / rear right  [B9-32LA19A]

Yokomo B9-32LA19A Lower Bulkhead (A)(F Left/R Right) for BD9
Price:
USD$31.00
Brand:
Yokomo
Model:
B9-32LA19A
GTIN:
0639342204472
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - MRTC-BD10FF category
Write a review

Lower bulkhead (A) for BD9

This is an RC-scale lower bulkhead (A) designed for the BD9 chassis family. The part covers the front left or rear right position and is supplied as a single piece suitable for routine maintenance or part replacement on BD9-based setups.

The component's role in the chassis is structural and alignment-focused, contributing to suspension geometry and drivetrain clearance; when replacing, verify orientation matches the intended mounting side to maintain handling predictability.

Specifications

  • Item: Lower Bulkhead (A), front left / rear right, 1 pcs
  • Material: Not specified
  • Model Number: B9-32LA19A
  • Compatibility: MRTC-BD919, MRTC-BD919S, MRTC-BD10, MRTC-BD10A, MRTC-BD10FF, MRTC-BD10LC, MRTC-BD10LCA, MRTC-BD10LCR, MRTC-BD10LCRA

Compatible Models

  • MRTC-BD919
  • MRTC-BD919S
  • MRTC-BD10
  • MRTC-BD10A
  • MRTC-BD10FF
  • MRTC-BD10LC
  • MRTC-BD10LCA
  • MRTC-BD10LCR
  • MRTC-BD10LCRA

This genuine Yokomo replacement lower bulkhead (A) is intended for BD9-series RC cars and serves as a direct-fit spare to restore correct mounting points and preserve intended suspension and drivetrain alignment during setup or repair.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Which chassis does this part fit?

It fits the listed BD9 family models including MRTC-BD919, MRTC-BD919S and the MRTC-BD10 series models shown in the compatibility list.

How many pieces are included?

The package contains one piece intended for use on either the front left or rear right position.

Do I need any modifications to install it?

No modifications should be required for compatible chassis; confirm orientation and reuse original hardware to preserve alignment.

Is the material specified?

The source does not specify the material, so check the part on receipt if material properties are critical for your setup.

Copyright © 2008-2026 rcjaz.com All rights reserved