Yokomo B9-32UA19A Upper Bulkhead (A) for BD9  [B9-32UA19A]

Yokomo B9-32UA19A Upper Bulkhead (A)(F Left/R Right) for BD9
Price:
USD$27.70
Brand:
Yokomo
Model:
B9-32UA19A
GTIN:
0639342204496
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - MRTC-BD10FF category
Write a review

Upper bulkhead (A) for BD9

This is the Yokomo B9-32UA19A upper bulkhead (A) designed for BD9-family RC touring chassis. The part is supplied as 1 pcs and is intended for installation on the front-left position or the rear-right position depending on chassis layout and setup.

Use this bulkhead when replacing a worn or damaged upper mount or when swapping suspension geometry during setup work. It functions as a mounting point for suspension links and locates the upper arm relative to the chassis, so verify left/right placement before fitting.

Specifications

  • Item: Upper Bulkhead (A) front-left / rear-right
  • Material: Not specified
  • Model Number: B9-32UA19A
  • Compatibility: MRTC-BD919, MRTC-BD919S, MRTC-BD10, MRTC-BD10A, MRTC-BD10FF, MRTC-BD10LC, MRTC-BD10LCA, MRTC-BD10LCR, MRTC-BD10LCRA

Compatible Models

  • MRTC-BD919
  • MRTC-BD919S
  • MRTC-BD10
  • MRTC-BD10A
  • MRTC-BD10FF
  • MRTC-BD10LC
  • MRTC-BD10LCA
  • MRTC-BD10LCR
  • MRTC-BD10LCRA

Fitment checks: confirm chassis code and left/right location before installation, inspect fasteners and link geometry after fitment, and test on a static rig before running on track.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is this part a single piece and how many are supplied?

The package contains 1 pcs of the Upper Bulkhead (A) suitable for one mounting position.

Which positions on the car does this part fit?

This bulkhead is intended for use on the front-left or the rear-right position depending on the chassis configuration.

Can I swap this with other bulkhead types on the BD10 variants?

Compatibility is listed for specific BD9 and BD10 codes; confirm part numbers and fitment since some variants use different upper mount geometries.

Any setup considerations after installing this bulkhead?

After fitting, recheck suspension link lengths, toe and camber settings and ensure no binding occurs through the suspension travel.

Copyright © 2008-2026 rcjaz.com All rights reserved