Yokomo BD9 FWD Chassis 7075 2.0mm MM by Arrowmax AM-920022  [AM-920022]

Precision FWD Chassis Plate for Yokomo BD9

This Arrowmax AM Medius chassis plate is an RC-scale front-wheel-drive (FWD) replacement for the Yokomo BD9 platform, produced as part of Arrowmax’s AM Medius line. The plate is made from 7075 aluminum and specified at 2.0mm thickness, intended to affect chassis stiffness and mounting geometry without changing basic layout.

For racers and hobbyists focused on fine-tuning handling, a blank chassis plate such as this provides a predictable change in torsional rigidity that can influence turn-in and mid-corner behaviour. Use it as a direct swap when your setup calls for increased baseline stiffness or when replacing a damaged factory plate.

Installation is straightforward for those familiar with BD9 maintenance: remove the stock plate, transfer mounting hardware and any reinforcement parts, and secure this plate with the same fasteners. Check hole alignment and clearances around suspension pick-up points before final tightening. No additional tools or parts are required beyond the standard setup tools you already use for the BD9.

Compatibility

• Yokomo BD9

If your setup notes call for a 2.0mm 7075 chassis plate, this AM-920022 unit offers a direct, material-specific option for adjusting BD9 chassis stiffness and tuning on-track balance; verify fit during installation and retest handling after any change.