Yokomo BD9 MID chassis 7075 2.0mm by Arrowmax AM-910019  [AM-910019]

Arrowmax AM-910019 AM Medius Yokomo BD9 MID Chassis Aium 7075 2.0mm
Price:
USD$91.07
Brand:
Arrowmax
Model:
AM-910019
Condition:
Brand New
Write a review

Mid chassis upgrade for BD9

This Arrowmax AM-910019 mid chassis is an RC-scale replacement designed for use with the Yokomo BD9 touring car platform. It serves as a direct-fit option to alter chassis stiffness and influence handling balance during on-track setup work.

The component is intended to work within the BD9 chassis architecture and to be used alongside standard BD9 mounting points and hardware. When replacing the original plate, check alignment of motor mount, battery location, and suspension pickup points to maintain intended geometry.

Specifications

  • Item: MID chassis plate
  • Material: Aium 7075
  • Model Number: AM-910019
  • Thickness: 2.0mm
  • Compatibility: Yokomo BD9

Use this mid chassis to fine-tune flex characteristics and achieve a different handling bias; verify screw torque and clearances after installation and recheck setup on the track.

Is this chassis a direct bolt-on for Yokomo BD9?

It is designed for Yokomo BD9 mounting points, but verify alignment and hardware fit before final assembly.

What does the 2.0mm thickness change in handling?

Increasing plate thickness generally raises chassis stiffness, affecting mid-corner grip and transition responsiveness during tuning.

Any special hardware required for installation?

Standard BD9 chassis screws and spacers are expected to be used; check screw lengths and thread engagement to avoid interference.

Can this part be combined with other chassis braces or stiffeners?

Yes, but confirm clearances and the combined effect on overall flex before making permanent changes to your setup.

Copyright © 2008-2026 rcjaz.com All rights reserved