Yokomo BL-P4105DPA Motor Combo Set — BL-PRO4 ESC with ZERO-S Drift 10.5T Motor  [BL-P4105DPA]

Yokomo BL-P4105DPA jp
Price:
USD$319.20
Brand:
Yokomo
Model:
BL-P4105DPA
GTIN:
639342205523
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Motor and ESC combo for drift setups

This combo pairs Yokomo's BL-PRO4 electronic speed controller with the ZERO-S Drift 10.5T motor to deliver a matched powertrain for 1/10 drift platforms. The set targets hobbyists seeking a coordinated ESC and motor package that fits common drift chassis layouts without having to source parts separately.

Compatibility centers on the YD-2 series chassis while retaining broad fitment for similar drift platforms; the motor's color-anodized can is a visual and corrosion-resistant detail, and the BL-PRO4 ESC is the established option among advanced tuners for its configurable behavior and integration with common battery and receiver setups.

Installation notes: confirm motor mount spacing and pinion engagement on your chassis, verify connector types between ESC and motor, and perform ESC calibration and timing checks per your transmitter and battery setup. For tuning, treat the combo as a matched baseline and adjust ESC parameters and differential/suspension setup on the chassis to refine cornering balance.

Specifications

  • Item: Motor and ESC combo set
  • Material: Color-anodized motor can, electronic components (ESC)
  • Model Number: BL-P4105DPA
  • Compatibility: YD-2 series chassis, Universal

Compatibility

  • YD-2 series chassis
  • Universal

Use this combo as a matched motor and ESC baseline for drift setups, then tune vehicle electronics and mechanical settings to achieve the desired slide behavior and throttle response.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is this combo plug-and-play on YD-2 chassis?

The set is provided as a matched motor and ESC; you still need to check motor mount spacing, pinion fitment, and connector types on your YD-2 chassis before installation.

What should I check when installing the BL-PRO4 ESC?

Verify battery compatibility, receiver connections, ESC firmware settings, and perform an ESC calibration procedure to match throttle endpoints before first run.

Can I change the pinion gear when using this motor?

Yes, pinion selection is part of tuning for gear ratio and motor load, but ensure gear mesh and clearance are set correctly after any change.

Does the color-anodized finish affect performance?

The anodized finish is primarily protective and cosmetic; it does not alter the electrical or magnetic characteristics of the motor core.

What tuning steps work best with this combo for drifting?

Start with ESC throttle response and braking settings, then adjust mechanical setup like differential and suspension to balance throttle-induced slides with steering control.

Copyright © 2008-2026 rcjaz.com All rights reserved