Yokomo MS-002S-2 steel main chassis for Master Speed MS2.0  [MS-002S-2]

Yokomo MS-002S-2 jp
Price:
USD$144.00
Brand:
Yokomo
Model:
MS-002S-2
GTIN:
639342231041
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - MSR-010 category
Write a review

Steel main chassis for MS2.0

This steel main chassis is a direct accessory for the Master Speed MS2.0 platform and is intended as a scale RC main chassis component only. The part uses steel as its primary material, which increases mass compared with typical alloy or composite plates and shifts mounting points lower on the chassis plate to reduce the vehicle's center of gravity.

Lowered fixing positions change the suspension and body clearance relationships; when installing, verify screw alignment and make incremental checks on ride height and droop. Expect adjustments to spring preload, anti-roll tuning, and body mounting to suit the new mass distribution rather than changes to electronics or drive components.

Specifications

  • Item Main chassis
  • Material Steel
  • Model Number MS-002S-2
  • Compatibility MSR-020S / MSR-020 / MSR-020A

Compatible Models

  • MSR-020S
  • MSR-020
  • MSR-020A

Use this chassis when you need a heavier, lower-mounted steel plate to influence balance and roll characteristics on track; confirm clearances and re-tune suspension settings after fitment.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this chassis fit Master Speed MS2.0 out of the box?

It is designed for Master Speed MS2.0 variants that use the MSR-020 family of plates; check that your mounting points match MSR-020S/MSR-020/MSR-020A patterns before installation.

How does the steel material affect handling?

Steel increases mass and, with the lower fixing points, lowers the center of gravity which can reduce body roll and change weight transfer, requiring suspension retune.

Are additional parts needed for installation?

No additional proprietary parts are specified, but verify that your existing screws and spacers align with the lowered mounting points and replace any worn fasteners as needed.

Will electronics or servo mounts need alteration?

Electronics and servo mounts typically remain unchanged, but confirm vertical clearance for the ESC, motor, and servo after fitting due to the lower chassis plate height.

Copyright © 2008-2026 rcjaz.com All rights reserved