Yokomo R12-02C Graphite Main Chassis for R12 W.Conv. — Graphite main chassis for R12 conversion  [R12-02C]

Main chassis for R12 conversion

This graphite main chassis is designed as the replacement primary plate for the R12 W.Conv. conversion kit. It is an RC-scale accessory intended for hobby vehicle chassis work, providing a wider front tread reference and a shifted servo mounting layout to suit tuning preferences.

The front tread on this chassis is wider than standard R12 plate geometry, which affects steering geometry and roll center behaviour when combined with standard suspension parts. The servo mount location is positioned to accept the servo closer to the rear compared with the stock layout, allowing alternate linkage routing and center-of-gravity adjustments without altering separate subframes.

Installation notes: the part replaces the main chassis plate in the R12 W.Conv. build, using the same mounting points; verify fastener fit and clearance during initial assembly. During setup, expect steering and handling changes tied to the wider front track and rearward servo placement, and adjust toe and camber to compensate as required.

As a direct-fit main chassis for R12 W.Conv., this graphite plate is aimed at drivers who adjust handling through track width and servo positioning; use it as a stable platform for progressive setup changes and component placement experiments.