Yokomo R12-22 Aluminum rear body mount block for R12  [R12-22]

Rear body mount block for R12

This is an aluminum rear body mount block made for the Yokomo R12 platform and intended as a direct-scale accessory for 1/12 touring RC cars. Its role is to secure and allow fine adjustment of the rear body shell's mounting point, giving you a stable attachment and predictable reference when tuning rear body height and fitment.

Compatibility is based on the chassis list supplied with the part source. The block is suitable as a standard replacement on YOKOMO R12 and can be used as an option on specified GT-series chassis. Confirm hole spacing and mount alignment on your chassis before fitting.

• Supported chassis: GT5-R2 / GT5-RS2 / YR-R12C3 / YR-R12C31 / GT5-R35 / GT5-SC430 / GT3-REA / GT3-IS350 / GT3-B4 / GT3-CAX / GT3-BRZ / GT3-AHP / GT-B

Installation notes: remove the rear body shell and existing mount hardware, test-fit the block to verify alignment, then tighten mounting screws evenly. Use appropriate hex driver for the existing hex screws and avoid over-torquing to prevent thread damage. The block is intended to work with existing body posts and mount hardware on compatible chassis.

Tuning role: this mount block provides a fixed, repeatable reference for rear body positioning, which helps when comparing different body shells or making incremental changes to rear body height during setup sessions.