Yokomo SD-670S Slipper Spacer and 2.6mm SHC Screw for D-Max  [SD-670S]

Yokomo SD-670S Slipper Spacer/Screw for D-Max
Price:
USD$1.60
Brand:
Yokomo
Model:
SD-670S
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - DMAX category
Write a review

Slipper spacer and 2.6mm SHC screw

This is an RC-scale slipper spacer and a 2.6mm SHC screw designed for D-Max standard parts. The set provides the basic hardware needed to adjust slipper clutch clearance and bolt the spacer in place without altering the original D-Max slipper assembly layout.

Use context: intended for fine slipper clutch tuning when you need to change spacing or replace a lost screw during setup and track maintenance. The 2.6mm SHC designation identifies the screw head style and diameter used in many D-Max standard assemblies.

Installation notes: check existing slipper stack height and ensure the spacer sits flush before tightening, avoid over-torquing the 2.6mm SHC screw, and recheck slipper engagement after any change. This part is for RC model use only and matches D-Max standard part interfaces.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What does this part fit?

It fits D-Max standard slipper assemblies, serving as a spacer paired with a 2.6mm SHC screw for clutch adjustment.

Will this change slipper performance?

The spacer changes stack height, which affects engagement points; use small increments and test to dial slipper behaviour.

Do I need special tools to fit it?

A standard hex driver that fits 2.6mm SHC screws is sufficient, plus basic setup checks; no special tools are required.

Copyright © 2008-2026 rcjaz.com All rights reserved