Yokomo SO-415RA Aluminum Rear Hub Carrier L/R for SO series - Hobby Spare  [SO-415RA]

Yokomo SO-415RA Aluminum Rear Hub Carrier L/R for SO series
Price:
USD$43.10
Brand:
Yokomo
Model:
SO-415RA
GTIN:
639342228669
Condition:
Brand New
Write a review
alt="Yokomo SO-415RA Aluminum Rear Hub Carrier L/R for SO series" title="Yokomo SO-415RA Aluminum Rear Hub Carrier L/R for SO series"

Aluminum rear hub carrier for SO series

This aluminum rear hub carrier is made for the 2WD off-road SO series, replacing the standard resin hub carrier to increase structural rigidity and improve handling consistency.

In practical track use the stiffer aluminum carrier reduces flex under sudden load such as hard landings or aggressive acceleration, helping the chassis hold its line through jumps and tight corners. The part accepts the same height insert as the standard unit, so roll center and skid angle adjustments remain available without changing mounting geometry.

Final machining raises fitment accuracy, therefore we recommend installing new bearings when fitting this hub carrier, as pressing in used bearings may lead to difficult removal later. Designed specifically as an RC-scale upgrade component, it focuses on predictable handling and tuning flexibility rather than aesthetic change.

Specifications

  • Item: Aluminum Rear Hub Carrier L/R
  • Material: Aluminum
  • Model Number: SO-415RA
  • Compatibility: SO series 2WD off-road, Universal, ROR-020, ROR-020RTR

Compatibility

  • SO series (2WD off-road)
  • Universal
  • ROR-020
  • ROR-020RTR

As an aluminum replacement for the stock resin carrier, this part is intended for drivers who want firmer suspension response and more consistent line holding; pair with fresh bearings and verify roll-center settings after installation to optimize handling.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this replace the stock rear hub carrier directly?

Yes, it is designed as a direct replacement for the SO series rear hub carrier and uses the same mounting points and height insert compatibility as the stock unit.

Do I need to change bearings when installing this part?

It is recommended to use new bearings during installation because the final machining yields tight tolerances that may make removal of pressed used bearings difficult.

How does aluminum affect handling compared to resin?

Aluminum increases structural stiffness at the hub, which reduces flex under load and can improve stability on landings and during aggressive corner exits, altering the suspension response.

Will I need to re-tune roll center or camber after fitting this carrier?

You can use the same height insert as the standard carrier, so you can preserve or intentionally change roll center and skid angle; check settings after installation and adjust as needed for desired handling.

Copyright © 2008-2026 rcjaz.com All rights reserved