Yokomo Y2-202SLR Red Anodized Aluminum Slide Rack Set  [Y2-202SLR]

Yokomo Y2-202SLR jp
Price:
USD$132.20
Brand:
Yokomo
Model:
Y2-202SLR
GTIN:
639342173709
Condition:
Brand New
Write a review
alt="Yokomo Y2-202SLR jp" title="Yokomo Y2-202SLR jp"

Slide rack with integrated bulkhead

This red anodized aluminum slide rack set is an RC-scale front slide rack and bulkhead assembly designed to replace the stock front rail on supported drift and touring platforms. The unit uses milled rails and a machined bulkhead to reduce mass in the front section while keeping structural contact points rigid.

When fitted to a resin chassis the increased front-end stiffness reduces the tendency for the front tyre to hook when entering corners, which results in a more consistent steering response. The forward-tilted slide rack geometry is intended to produce an Ackermann characteristic suited to drifting setups, allowing finer control of inside/outside wheel angles during cornering.

Installation is typical of slide rack swaps: remove the stock front rail, align the new bulkhead to the chassis mounting points and secure with the original hardware. No additional parts are assumed necessary beyond the components supplied on the chassis version noted in the compatibility list. Tuning-wise, expect changes in initial steering bite and adjust toe, steering throw, and suspension setup to rebalance understeer/oversteer for your particular layout.

Specifications

  • Item: Slide rack set with integrated front bulkhead
  • Material: Aluminum, red anodized
  • Model Number: Y2-202SLR
  • Compatibility: See compatible models list below

Compatible Models

  • DP-GR86
  • DP-GR86G
  • DP-GR86RTRG
  • DP-GR86RTRW
  • DP-GR86W
  • DP-GRA90
  • DP-GRA90R
  • DP-GRA90W
  • DP-YD2
  • DP-YD2AC
  • DP-YD2ACA
  • DP-YD2E
  • DP-YD2EG
  • DP-YD2EPLS
  • DP-YD2EX
  • DP-YD2EXR
  • DP-YD2G
  • DP-YD2PLS
  • DP-YD2RAR
  • DP-YD2RPLS
  • DP-YD2RSAR
  • DP-YD2RTRR-1
  • DP-YD2RTRR-2
  • DP-YD2RTRW-1
  • DP-YD2RTRW-2
  • DP-YD2RXR
  • DP-YD2S
  • DP-YD2S-PL
  • DP-YD2SAR
  • DP-YD2SG
  • DP-YD2SSAR
  • DP-YD2SX3R
  • DP-YD2Z
  • DP-YD2ZG
  • DP-YD2ZXR
  • RDR-010
  • RDR-010-1
  • RDR-010G
  • RDR-010G-1
  • RDR-020
  • RDR-020G
  • DPR-GRA90W
  • DPR-GRA90R
  • DPR-GR86G
  • DPR-GR86W
  • DPR-DP
  • DPR-RZ34BL
  • DPR-RZ34R
  • DP-RZ34
  • DP-RZ34BL
  • DP-RZ34R
  • DP-MS15
  • DP-JZXBN
  • DP-MS15BL
  • DPR-MS15
  • DP-RS13SP
  • DP-FCBN

This slide rack set is intended for drivers who want a stiffer front section and a drift-oriented Ackermann geometry on compatible DP and RDR platforms; expect a measurable change in steering feel that should be tuned alongside toe and steering throw to match driving style.

Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this replace the stock front rail on my DP-YD2 chassis?

The part is designed to fit the listed DP-YD2 variants; install by removing the stock front rail and mounting the new bulkhead to the original chassis points using the existing hardware.

What material is used and does the finish affect maintenance?

The unit is machined from aluminum with a red anodized finish; anodizing provides surface protection but keep threaded interfaces clean and use appropriate thread lockers if specified by your chassis manual.

How does the forward tilt affect handling?

The forward-tilted rack alters the Ackermann characteristic to favor drift-style turning, which can make inside wheel angles more suitable for controlled slides; adjustments to toe and steering throw are recommended after fitting.

Is any chassis modification required for installation?

No chassis modifications are expected for the listed platforms; the unit mounts to existing points but verify alignment and clearance before final tightening.

Copyright © 2008-2026 rcjaz.com All rights reserved