Yokomo YOKD082 Aluminium Front Upper Arm Mount for DP7C  [YOKD082]

Front upper arm mount for DP7C

This aluminium front upper arm mount is an RC-scale replacement part designed for use on the DP7C chassis. The component provides a rigid mounting point for the front upper arm and plays a direct role in front suspension geometry and handling response during tuning and setup.

The mount is intended to be fitted in place of the stock upper arm mount and works with the DP7C front suspension layout, allowing small incremental changes to upper arm height and pivot position. These adjustments affect camber and roll center, which are key variables when refining steering feel and balance on drift-oriented setups.

Installation typically requires removal of the front bulkhead or the shock tower depending on your chassis layout, and secure fastening with the original mounting hardware. When replacing parts, confirm alignment of the arm pivot and check for binding across suspension travel before final tightening. Regular inspection for wear and secure torqueing of screws is recommended as part of routine maintenance.

Use this mount to achieve more predictable front-end behavior when tuning camber and roll-center on DP7C-based drift cars, and verify fitment with your existing front-arm and shock components before track use.