Yokomo YOKTS2142 - Aluminium Front Suspension Arm for DRB/DIB (1mm, Black)  [YOKTS2142]

Aluminium front suspension arm for DRB/DIB

The Yokomo YOKTS2142 is an aluminium front suspension arm manufactured for RC touring car setups that use the DRB or DIB chassis platform. As an RC-scale replacement part it provides a rigid mounting point for the front suspension components and is intended for hobby use only.

This arm is supplied as a single-part aluminium unit with a 1mm wide profile and black finish. It fits into the front suspension assembly to alter geometry and response; installers should confirm fit against their DRB or DIB components before assembly. The part supports tuning tasks such as roll stiffness adjustment and toe control when used alongside standard suspension hardware and linkages.

Installation notes: inspect existing mounting pins and ball studs for wear, ensure correct orientation relative to the hub carriers, and torque fasteners to your chassis manufacturer’s recommended settings. Use threadlocker on metal-to-metal fasteners only when required by your setup. This part is for 1/10 scale RC touring cars and must not be used on full-size vehicles.

Choose this arm when you need a direct aluminium replacement for front suspension tuning on DRB or DIB touring car chassis; pair with appropriate hardware and setup adjustments to achieve the intended handling changes.