The Yokomo YOKTW14S1 wheel is an RC-scale accessory made for 1/10 drift cars where low-offset, visual style, and tight steering geometry are priorities. The wheels carry a chrome-like finish intended for use with drift tyres and hard plastic rims typical in scale drift setups.
Installation follows standard 1/10 wheel procedures: mount the wheel onto the car's wheel hex or hub, secure with the appropriate nut, then verify tyre seating and clearance with suspension travel and steering throw. Inspect hub fit and run a test spin before full use to confirm there is no rubbing against body or suspension components.
In tuning, small-diameter, low-offset wheels like these change scrub radius and can tighten turn-in when paired with narrow or offset tyres; use them as a visual and handling option when fine-tuning steering response, clearance, and drift angle. Always match tyre profile and wheel width to your chassis setup for predictable behaviour.
Copyright © 2008-2026 rcjaz.com All rights reserved