Yokomo YOKZCTB29 Titanium Turnbuckle 29mm Tie Rod 2pcs  [YOKZCTB29]

YOKZCTB29 Titanium turnbuckle overview

This Yokomo YOKZCTB29 item is a 29mm titanium turnbuckle sold as a set of 2pcs for RC-scale tie-rod applications. It is an aftermarket, lightweight link intended for fine length adjustment in steering and suspension linkages on model cars. The titanium material offers higher corrosion resistance and reduced mass compared with typical steel replacements, while keeping form factor suitable for standard rod-end fittings.

Use the turnbuckle to make small incremental changes to tie-rod length for toe, caster symmetry, or roll-center tuning. When installing, thread each end into the existing rod ends or ball cups and adjust by rotating the center body to change overall length. Make adjustments in small increments, verify there is no binding in the steering or suspension travel, and confirm there is no endplay at the rod ends before running.

Because this is an RC-scale component, check your model's rod-end thread and ball-cup compatibility before fitting. The pack contains 2pcs so you can replace a pair of linkages or keep a spare for maintenance.