Yokomo YOKZCTB30B - Titanium Turnbuckles, 30mm  [YOKZCTB30B]

Titanium turnbuckles for RC

The Yokomo YOKZCTB30B is a 30mm titanium turnbuckle designed as a direct drop-in upgrade for RC-scale tie-rod and linkage applications. As a metal replacement for stock steel or aluminum links, titanium reduces weight at the link while keeping high tensile strength, helping maintain setup without excess flex during aggressive cornering and quick steering inputs.

Functionally, these turnbuckles serve two roles: they provide the threaded adjuster needed for toe and suspension geometry tuning, and they act as the structural link between steering components and wheel hubs or suspension arms. Use them where a threaded, adjustable rod end is required to set or fine-tune alignment angles on model cars.

Installation is straightforward for anyone familiar with turnbuckle-type links: remove the original rod ends, thread the turnbuckle into each rod end or ball cup, and lock the position with the existing jam nuts or thread-locking method appropriate for your setup. During installation, check for correct thread engagement and smooth articulation through the suspension travel to avoid binding or unwanted preload on bearings and pivots.

Tuning notes: small incremental adjustments to length will change toe and minor suspension geometry; make one change at a time and test on track or in a controlled run to judge handling effects. Titanium turnbuckles are best used in setups where weight savings and corrosion resistance are desired, but always inspect for wear at thread roots and rod ends after heavy use.