Yokomo Z2-302S2 Gearbox spacer set (2.0mm) for YZ-2 series [Z2-302S2]

Price:

USD$5.00

Brand:

Yokomo

Model:

Z2-302S2

GTIN:

3888

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
Spares / Hop-ups - Yokomo - Off-Road Chassis Parts category

Write a review

Description
FAQ

Gearbox spacer for YZ-2 series

This is an aluminum spacer set designed for RC 1/10 scale YZ-2 series cars to change roll behaviour by raising the gearbox mounting height. The spacer thickness is 2.0mm and the part fits under the gearbox to affect weight transfer and roll centre margins without changing suspension geometry directly.

Placement is under the gearbox, above the rear suspension mount and ahead of the rear brace. In practical tuning, adding this spacer shifts the chassis roll response and can be used to reduce rear grip roll or to fine tune mid-corner balance depending on other setup choices such as anti-roll bars and shock settings. Installation requires basic disassembly of the lower chassis area to lift the gearbox slightly and insert the spacer between the gearbox and chassis mounting point.

Compatibility

B-YZ2
B-YZ2CA
B-YZ2DT
B-YZ2DTM
B-YZ2DTMW
B-YZ2DTM2
B-YZ2CAL2
B-YZ2DTM2S

Remark :

Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What does the spacer change on the YZ-2 chassis?

It raises the gearbox mounting height by 2.0mm, which shifts roll behaviour and weight transfer to help fine tune corner balance.

Is any modification required to fit the spacer?

No permanent modification is required, but the gearbox area must be accessed and the spacer inserted between the gearbox and chassis mounting point.