Yokomo Z2-DTMB J Concept S2 body shell for YZ-2 DTM and ROR-010 compatibility  [Z2-DTMB]

Yokomo Z2-DTMB YZ-2 S2 Body by J Concept
Price:
USD$18.70
Brand:
Yokomo
Model:
Z2-DTMB
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - ROR-010 category
Write a review

J Concept S2 body for YZ-2 DTM

The Yokomo Z2-DTMB is the J Concept S2 body shell offered for 1/10 electric touring car chassis that follow the YZ-2 DTM lineage and ROR-010 family. This shell ships with a window masking sheet to simplify painting and trimming, and its contours match the mounting points and wheel openings expected on the listed chassis.

Compatibility and fit are the primary focus: the shell preserves standard cut lines so it mounts without modification on the supported frames, and the included masking sheet makes paint prep straightforward. Measure mounting posts and ride height clearance before final trimming to confirm fit with your shock and body mount setup.

For tuning, the S2 profile influences airflow and balance. Use minor trimming at the front splitter and rear overhang to tune turn-in and rear bite, and experiment with mounting fore/aft to influence yaw sensitivity. Keep the shell trimmed symmetrically and use the supplied mask to protect windows and trim lines during painting.

Specifications

  • Item: J Concept S2 body shell
  • Material: Not specified
  • Model Number: Z2-DTMB
  • Compatibility: B-YZ2DTM, B-YZ2CAL2, B-YZ2DTMW, B-YZ2DTM2, B-YZ2DTM2S, B-YZ2DTM3, B-YZ2CAL3, B-YZ2DTM31, B-YZ2CAL31, ROR-010, ROR-010RTR, ROR-010RTR-1

Choose this shell when you need a J Concept S2 profile that fits YZ-2 DTM derived chassis and ROR-010 variants, and when included masking simplifies paint and prep work.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What is included in the package?

The package includes the J Concept S2 body shell and a window masking sheet for painting preparation.

Will this fit a stock YZ-2 DTM chassis without modification?

The shell is produced for YZ-2 DTM derived frames and should fit standard mounting points, but confirm post spacing and trim as needed for shocks and tyres.

Can painting change handling characteristics?

Painting itself does not change handling, but trimming and where the shell is mounted can affect aerodynamics and balance, so adjust mounting positions carefully.

Is any drilling required for mounting?

Mounting typically uses standard body post locations, but small trimming or hole alignment checks may be necessary depending on your chassis setup.

Copyright © 2008-2026 rcjaz.com All rights reserved